TT® FIX Order Routing

Trade Capture Report Ack (AR) Message

Trade Capture Report Ack (AR) Message

Trade Capture Report Ack (AR) Message

Purpose

Used to acknowledge the receipt of a trade capture report from a counterparty

Message Direction

From FIX client to TT FIX

Tag Directory

Click the links below to navigate to the documentation for that tag.

Supported Tags

Tag # Field Name Req’d Data type Comments
Component: <Standard Header>
Y 35= (MsgType)
For additional information about this component group, consult the full documentation.
Tag # Field Name Req’d Data type Comments
8 BeginString Y String

FIX protocol version

The tag indicates the beginning of a new message. This tag must be the first tag in the message.

You must set the value to FIX.4.2 or FIX.4.4.

9 BodyLength Y int

Message length (in characters)

The value represents number of characters in the message following this tag up to, and including, the delimiter immediately preceding Tag 10 (CheckSum). This tag must be the second field in a message.

35 MsgType Y String

Type of message contained in the message body

This tag must appear third in the list of header tags.

Possible values include:

  • 0: Heartbeat
  • 1: Test Request
  • 2: Resend Request
  • 3: Reject
  • 4: Sequence Reset
  • 5: Logout
  • 8: Execution Report
  • 9: Order Cancel Reject
  • A: Logon
  • B: News
  • c: Security Definition Request
  • D: Order Single
  • d: Security Definition
  • e: Security Status Request
  • f: Security Status
  • F: Order Cancel Request
  • G: Order Cancel Replace Request
  • H: Order Status Request
  • V: Market Data Request
  • W: Market Data Snapshot Full Refresh
  • X: Market Data Incremental Refresh
  • Y: Market Data Request Reject
  • AE: Trade Capture Report
49 SenderCompID Y String

ID for the FIX client, corresponding to the RemoteCompID specified for the user in TT User Setup

56 TargetCompID Y String

TT session identity

TT FIX does not validate this field. To guarantee session persistence, the FIX client must maintain the same value of this field for the life of the session.

You can use any value in this tag to identify the TT session for the FIX client. TT FIX will return this value in tag 49 (SenderCompID) in its responses.

50 SenderSubID N String

Unique ID for the message sender

For order routing messages, this tag overrides the exchange Operator ID configured in Setup.

57 TargetSubID C String

Unique ID for the message receiver.

Condition: If the Target Sub Id field has a value for the FIX Session in Setup, you must supply that value is this tag for a Logon (A) message.

116 OnBehalfOfSubID C String

New tag for TT

Unique Trader ID

The value maps to the Alias field configured for a user in Setup.

Condition: Required when multiple users are associated with the account.

34 MsgSeqNum Y SeqNum

Message sequence number
142 SenderLocationID N string Specific message originator's location (i.e. geographic location and/or desk, trader)
43 PossDupFlag C Boolean

Whether the sequence number for this message is already used

Possible values include:

  • Y: Possible duplicate
  • N: Original transmission

Condition: Must send when a FIX client resends messages

Note: If 43=Y is present, TT will reject New Order Single (D), Order Cancel/Replace Request (G), New Order Multileg (AB), and Multileg Order Cancel/Replace (AC) messages with a Business Message Reject (j) message.

122 OrigSendingTime C UTCTimestamp

Original time of message transmission, when transmitting orders as the result of a resend request

Always expressed in UTC.

Condition: Required for resent messages
52 SendingTime Y UTCTimestamp

Time, in UTC, the message was sent.
571 TradeReportID N String

Unique identifier of trade capture report

Note: In Trade Capture Report messages, this value is restricted and cannot be modified by TT FIX rules.

572 TradeReportRefId N String

Reference identifier used with CANCEL and REPLACE transaction types

17 ExecID N string

Unique identifier for this execution report.

This report ID remains unique until TT FIX resets.

Note: Do not try to interpret or parse the value.

820 TradeLinkId N String

Used to link a group of trades together. Useful for linking a group of trades together for average price calculations.

487 TradeReportTransType N int

Trade Report message transaction type

Possible values include:

  • 0: New
  • 1: Cancel
  • 2: Replace
  • 3: Release
  • 4: Reverse
  • 5: Cancel du to back out of trade
  • 101: Inquire
  • 102: Accept
  • 999: Unknown
856 TradeReportType N int

Type of trade report

Possible values include:

  • 0: Submit
  • 1: Alleged
  • 2: Accept
  • 3: Declie
  • 5: No was
  • 6: Cancel
  • 11: Alleged new
  • 13: Alleged no was
  • 999: Unknown
  • 1000: Clearing
939 TradeRptStatus N char

Status of the trade report

Possible values include:

  • 0: Accepted
  • 1: Rejected
  • 3: Accepted with errors
  • 99: Unknown
751 TradeReportRejectReason N int

Reason the Trade Capture Report was rejected

Possible values include:

  • 0: Successful
  • 1: Invalid party information
  • 2: Unknown instrument
  • 3: Unauthorized to report trades
  • 4: Invalid trade type
  • 99: Other
16963 Seq N int

The sequence number for the Trade Capture Report and Trade Capture Report Ack for the Order Status.

107 SecurityDesc N String

Can be used to provide an optional textual description for a financial instrument

60 TransactTime Y UTCTimestamp

Time, in UTC, the transaction occurred.

Note: Some Exchanges might send milliseconds in certain circumstances, in the form: YYYYMMDD-HH:MM:SS.sss. TT recommends that you allocate enough memory to handle the longer timestamp should an Exchange send it.

818 SecondaryTradeReportID N String

Secondary trade report identifier. Can be used to associate an additional identifier with a trade.

Component: <Instrument>
Y For tags that you include in the Instrument Component and any restrictions in their use, refer to Component: Instrument (FIX client request).
Instead of including the entire instrument block when communicating with TT FIX, client applications can use Tag 48 (SecurityID) and Tag 55 (Symbol).
Tag # Field Name Req'd Data type Comments
48 SecurityID Y String

ID of the instrument.

Note: The combination of this tag and tag 22 (IDSource) must uniquely identify an instrument in the TT platform.

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
22 IDSource Y String

Source for the value of tag 48 (SecurityID).

Possible values include:

  • 4: ISIN number
  • 5: RIC code
  • 8: Exchange symbol
  • 91: Ticker symbol
  • 96: TT security ID
  • 97: Alias
  • 98: Name
  • X: Series key
  • A: Bloomberg Code
  • S: OpenFIGI ID

Note: The following markets support RIC codes (22=5) for identifying futures, spreads and options instruments in tag 48 (SecurityID):

  • ASX
  • DGCX
  • CFE
  • CME
  • EEX
  • EUREX
  • Euronext
  • Hkex
  • ICE
  • ICE_L
  • LME
  • MEFF
  • MX
  • OSE
  • SGX
  • TFX
  • TOCOM

Note: The combination of this tag and tag 48 (SecurityID) must uniquely identify an instrument in the TT platform.

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
207 SecurityExchange C Exchange

Name of the market where the instrument trades.

TT FIX uses this value to identify the exchange that offers the security.

Possible values include:

  • AGGREGATOR
  • ALGO
  • ASE
  • ASX
  • B3
  • BitMEX
  • BrokerTec
  • CBOE
  • CBOT
  • CFE
  • CME
  • Coinbase
  • CoinFLEX
  • CurveGlobal
  • CZCE
  • DCE
  • DGCX
  • EEX
  • Eurex
  • Euronext
  • Fenics
  • FEX
  • HKEX
  • ICE
  • ICE_L
  • IDEM
  • INE
  • KCG
  • KRK
  • LME
  • LSE
  • MEFF
  • MEXDER
  • MOEX
  • MX
  • MX
  • NDAQ_EU
  • NFI
  • NFX
  • OSE
  • SGX
  • TFEX
  • TFX
  • TOCOM

Condition: Required when Tag 100 (ExtDestination) is absent and when tag 22 (IDSource) is 8 (Exchange symbol), 97 (Alias) or 9 (Name).

OR
100 ExDestination C Exchange

New tag for TT

Market Identifier Code (MIC) of the sub-market where the instrument trades.

Execution destination for the order as defined by the institution

Some traders use this tag in place of Tag 207 (SecurityExchange) to identify the exchange.

ISO 10383 defines a comprehensive list of MIC codes.

Condition: Required when Tag 207 (SecurityExchange) is absent and when tag 22 (IDSource) is 8 (Exchange symbol), 97 (Alias) or 9 (Name).

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
55 Symbol Y String

Exchange-provided product symbol for the tradable product.

When specifying instruments for NewOrderMultileg (AB) and MultilegOrderCancelReplace (AC):

  • When submitting multi-leg instrument, set tag 55 to "[NA]".
  • When tag 54 (Side) is B or C, the value in tag 55 is ignored; the values in tag 600 (LegSymbol) and tag 624 (LegSide) in the LegInstrument group are used instead.

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
For those exchanges that support alternate security ID (sometimes called aliases), client applications can use Tag 455 (SecurityAltID) to specify its alternate security ID. As instruments on different exchanges can share the same value for SecurityAltID, including SecurityExchange creates a unique identifier for each instrument.
Tag # Field Name Req'd Data type Comments
207 SecurityExchange C Exchange

Name of the market where the instrument trades.

TT FIX uses this value to identify the exchange that offers the security.

Possible values include:

  • AGGREGATOR
  • ALGO
  • ASE
  • ASX
  • B3
  • BitMEX
  • BrokerTec
  • CBOE
  • CBOT
  • CFE
  • CME
  • Coinbase
  • CoinFLEX
  • CurveGlobal
  • CZCE
  • DCE
  • DGCX
  • EEX
  • Eurex
  • Euronext
  • Fenics
  • FEX
  • HKEX
  • ICE
  • ICE_L
  • IDEM
  • INE
  • KCG
  • KRK
  • LME
  • LSE
  • MEFF
  • MEXDER
  • MOEX
  • MX
  • MX
  • NDAQ_EU
  • NFI
  • NFX
  • OSE
  • SGX
  • TFEX
  • TFX
  • TOCOM

Condition: Required when Tag 100 (ExtDestination) is absent
OR
100 ExDestination C Exchange

New tag for TT

Market Identifier Code (MIC) of the sub-market where the instrument trades.

Execution destination for the order as defined by the institution

Some traders use this tag in place of Tag 207 (SecurityExchange) to identify the exchange.

ISO 10383 defines a comprehensive list of MIC codes.

Condition: Required when Tag 207 (SecurityExchange) is absent

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
454 NoSecurityAltID Y NumInGroup

Replaces 7.X tag 10454 (NoSecurityAltID)

Number of alternate security IDs in this repeating group
> 455 SecurityAltID Y String

Replaces 7.X tag 10455 (SecurityAltID)

Alternate ID for an instrument or security, typically for display purposes.

> 456 SecurityAltIDSource Y String

Replaces 7.X tag 10456 (SecurityAltIDSource)

Alternate ID for an instrument or security

Possible values include:

  • 4: ISIN number
  • 5: RIC code
  • 8: Exchange security ID
  • 91: Ticker Symbol
  • 92: TT product family ID (sent only for Security Definition (d) messages)
  • 93: TT product ID (sent only for Security Definition (d) messages)
  • 94: Alt Symbol (For ICE, the value is the "Cleared Alias" for the contract.)
  • 95: Clearport
  • 97: Alias
  • 98: Name
  • 99: Other (Set to instrument symbol if both product symbol and an instrument symbol are present in PDS and they are not the same.)
  • A: Bloomberg Code
  • S: OpenFIGI ID

Note: 99 (Other) is not valid for order routing requests.

55 Symbol Y String

Exchange-provided product symbol for the tradable product.

When specifying instruments for NewOrderMultileg (AB) and MultilegOrderCancelReplace (AC):

  • When submitting multi-leg instrument, set tag 55 to "[NA]".
  • When tag 54 (Side) is B or C, the value in tag 55 is ignored; the values in tag 600 (LegSymbol) and tag 624 (LegSide) in the LegInstrument group are used instead.

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
167 SecurityType Y String

Asset class of the instrument.

Possible values include:

  • FUT: future
  • MLEG: multi-leg
  • OPT: option
  • SPOT: EEX spot products
  • CUR: currency
  • TBOND: treasury bond
  • CS: common stock
  • NONE: No security type (Not valid for 35=c, e or V)

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
You can also identify instruments by specifying its name and characteristics. You might use this method if your application or business practices do not use security IDs.
Tag # Field Name Req'd Data type Comments
207 SecurityExchange C Exchange

Name of the market where the instrument trades.

TT FIX uses this value to identify the exchange that offers the security.

Possible values include:

  • AGGREGATOR
  • ALGO
  • ASE
  • ASX
  • B3
  • BitMEX
  • BrokerTec
  • CBOE
  • CBOT
  • CFE
  • CME
  • Coinbase
  • CoinFLEX
  • CurveGlobal
  • CZCE
  • DCE
  • DGCX
  • EEX
  • Eurex
  • Euronext
  • Fenics
  • FEX
  • HKEX
  • ICE
  • ICE_L
  • IDEM
  • INE
  • KCG
  • KRK
  • LME
  • LSE
  • MEFF
  • MEXDER
  • MOEX
  • MX
  • MX
  • NDAQ_EU
  • NFI
  • NFX
  • OSE
  • SGX
  • TFEX
  • TFX
  • TOCOM

Condition: Required when Tag 100 (ExtDestination) is absent
OR
100 ExDestination C Exchange

New tag for TT

Name of the sub-market where the instrument trades.

Execution destination for the order as defined by the institution

Some traders use this tag in place of Tag 207 (SecurityExchange) to identify the exchange.

ISO 10383 defines a comprehensive list of MIC codes.

Condition: Required when Tag 207 (SecurityExchange) is absent

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
461 CFICode N String

Type of security using ISO 10962 standard, Classification of Financial Instruments (CFI code) values. ISO 10962 is maintained by ANNA (Association of National Numbering Agencies) acting as Registration Authority.

Note: For SPOT and CUR products, you must also specify the corresponding tag 167 (SecurityType) value.

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
167 SecurityType Y String

Asset class of the instrument.

Possible values include:

  • FUT: future
  • MLEG: multi-leg
  • OPT: option
  • SPOT: EEX spot products
  • CUR: currency
  • TBOND: treasury bond
  • CS: common stock
  • NONE: No security type (Not valid for 35=c, e or V)
107 SecurityDesc N String

Security description.

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
460 Product N int Product type associated with the security.

Possible values include:

  • 1: Agency
  • 2: Commodity
  • 3: Corporate
  • 4: Currency
  • 5: Equity
  • 6: Government
  • 7: Index
  • 8: Loan
  • 9: Money market
  • 10: Mortgage
  • 11: Municipal
  • 12: Other
  • 13: Financing
  • 14: Energy

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
55 Symbol C String

Exchange-provided product symbol for the tradable product.

When specifying instruments for NewOrderMultileg (AB) and MultilegOrderCancelReplace (AC):

  • When submitting multi-leg instrument, set tag 55 to "[NA]".
  • When tag 54 (Side) is B or C, the value in tag 55 is ignored; the values in tag 600 (LegSymbol) and tag 624 (LegSide) in the LegInstrument group are used instead.

Condition: Not used when Tag 167 (SecurityType)=MLEG.

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
200 MaturityMonthYear C MonthYear

Month and year the instrument reaches maturity in the format YYYYMM.

Note: If included, tag 541 (MaturityDate) will override this tag.

Condition: Required when Tag 167 (SecurityType) is not MLEG

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
541 MaturityDate C LocalMktDate

New tag for TT

Maturity date in format YYYYMMDD.

Note: This tag value overrides tag 200 (MaturityMonthYear) and tag 205 (MaturityDay), if they are also specified.

Condition: Required when Tag 167 (SecurityType) is not MLEG

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
205 MaturityDay C DayOfMonth

Day of expiration for the instrument.

TT FIX uses this value and Tag 200 (MaturityMonthYear) to specify the maturity date when Tag 167 (SecurityType) is not MLEG.

Range: 1-31

Note: If included, tag 541 (MaturityDate) will override this tag.

Condition: Required when multiple contracts exist for the same month

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
18223 ContractYearMonth N String

Contract term in the form, YYYYMM
18211 DeliveryTerm C char

Term of delivery for the instrument.

TT FIX uses this value to identify contracts that do not have a monthly delivery term.

Possible values include:

  • A: Same day
  • B: Balance of month
  • D: Day
  • E: Weekly
  • H: Hour
  • L: Balance of week
  • M: Month
  • N: Next day
  • P: Pack
  • Q: Quarterly
  • S: Seasonal
  • T: Weekend
  • U: Bundle
  • V: Variable
  • W: Week
  • X: Custom
  • Y: Year

Condition: Required when both of the following are true:

  • The Security Definition indicates it is required.
  • The delivery term is not monthly.

Note: If you include this tag for instrument's that do not require it, TT FIX rejects the request.

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
743 DeliveryDate N LOCALMKTDATE

Date for contract delivery

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
201 PutOrCall C int

Whether the option represents a put or call

Possible values include:

  • 0: Put
  • 1: Call

Condition: Required when Tag 167 (SecurityType) is OPT

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
202 StrikePrice C Price

Stirke price for an option

Condition: Required when Tag 167 (SecurityType) is OPT

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
206 OptAttribute C char

Additional information about the option contract.

Condition: Required when both of the following are true:

  • Tag 167 (SecurityType) is OPT.
  • A version for the underlying instrument exists.

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
762 SecuritySubType N String

Sub-type qualification or identification of the SecurityType

For example, an instrument with SecurityType(167)="MLEG" might use this tag to specify the name of the option or futures strategy, such as "Calendar", "Vertical", or "Butterfly".

For sythetic staged orders, i.e., HandlInst (21)=3 and SecurityType(167)="Sythentic", the TT FIX engine checks whether the instrument already exists and automatically creates the synthetic spread if the instrument does not exist.

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
15 Currency C Currency

ISO-standard symbol for the instrument’s trading currency.

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
Component: <LegInstrumentGrp>
C Group

Repeating group of legs in a multileg instrument

The leg instrument group component block uses the same structure as the instrument component block sent from TT FIX to FIX clients, except that all of its tags represent the legs of an exchange-traded strategy. For example, instead of Tag 55 (Symbol) this block contains Tag 600 (LegSymbol).

Condition: Required when the value of tag 167 (SecurityType) is MLEG for New Order Single (D) and Order Cancel/Replace Request (G) messages.

Note: This tag can be included in messages sent from TT FIX Drop Copy sessions when the Compliance Feed (Send original order/cancel/change messages and pending execution reports) setting is enabled in Setup.
Tag # Field Name Req'd Data type Comments
555 NoLegs Y String

Replaces 7.X tag 146 (NoRelatedSym)

Number of legs in the repeating group

Can be zero (e.g. standardized multileg instrument such as an Option strategy). The value must be provided even if zero.

> 616 LegSecurityExchange C Exchange

Replaces 7.X tag 308 (UnderlyingSecurityExchange)

Multi-leg instrument's individual security's SecurityExchange.

Possible values include:

  • AGGREGATOR
  • ALGO
  • ASE
  • ASX
  • B3
  • BitMEX
  • BrokerTec
  • CBOE
  • CBOT
  • CFE
  • CME
  • Coinbase
  • CoinFLEX
  • CurveGlobal
  • CZCE
  • DCE
  • DGCX
  • EEX
  • Eurex
  • Euronext
  • Fenics
  • FEX
  • HKEX
  • ICE
  • ICE_L
  • IDEM
  • INE
  • KCG
  • KRK
  • LME
  • LSE
  • MEFF
  • MEXDER
  • MOEX
  • MX
  • MX
  • NDAQ_EU
  • NFI
  • NFX
  • OSE
  • SGX
  • TFEX
  • TFX
  • TOCOM

Condition: Required when both of the following are true.

  • The leg instrument trades on a different exchange that the parent instrument.
  • Both Tag 18100 (LegExtDestination) and Tag 602 (LegSecurityId) are absent.
OR
> 18100 LegExDestination C Exchange

New tag for TT

Execution destination for the leg order as defined by the institution

Some traders use this tag in place of Tag 207 (SecurityExchange) to identify the exchange.

ISO 10383 defines a comprehensive list of MIC codes.

Condition: Required when both of the following are true.

  • The leg instrument trades on a different exchange that the parent instrument.
  • Both Tag 616 (LegSecurityExchange) and Tag 602 (LegSecurityId) are absent.
OR
> 602 LegSecurityId C String

Replaces 7.X tag 309 (UnderlyingSecurityID)

TT security ID that uniquely identifies the instrument in the TT platform.

Condition: Required when both of the following are true.

  • The leg instrument trades on a different exchange that the parent instrument.
  • Both Tag 18100 (LegExtDestination) and Tag 616 (LegSecurityExchange) are absent.

Note: The combination of this tag and tag 603 (LegSecurityIDSource) must uniquely identify an instrument in the TT platform.

> 603 LegIDSource C String

Replaces 7.X tag 309 (UnderlyingSecurityID)

Multileg instrument's individual security's SecurityIDSource.

Condition: Required when Tag 18100 (LegExtDestination) and Tag 616 (LegSecurityExchange) are absent.

Note: The combination of this tag and tag 602 (LegSecurityId) must uniquely identify an instrument in the TT platform.

> 600 LegSymbol N String

Replaces 7.X tag 311 (UnderlyingSymbol)

Multi-leg instrument's individual security's Symbol.

Condition: Required when Tag 167 (SecurityType)=MLEG.

See Symbol (55) field for description.

Note: Users can map the value of Tag 600 to a different symbology using the Symbol Mapping feature in User Setup. Refer to the Fix Rules and Symbol Mappings section in the User Setup Help for more information.

> 608 LegCFICode N String

Multileg instrument's individual security's CFICode (tag 461).

See CFICode (461) field for description
> 620 LegSecurityDesc N String

Leg security description.
> 607 LegProduct N String

Multileg instrument's individual security's product.

Possible values include:

  • 1: Agency
  • 2: Commodity
  • 3: Corporate
  • 4: Currency
  • 5: Equity
  • 6: Government
  • 7: Index
  • 8: Loan
  • 9: Money market
  • 10: Mortgage
  • 11: Municipal
  • 12: Other
  • 13: Financing
  • 14: Energy
> 609 LegSecurityType N String

Replaces 7.X tag 310 (UnderlyingSecurityType)

Multi-leg instrument's individual security's SecurityType.

Possible values include:

  • FUT: Future
  • MLEG: Multi-leg
  • OPT: Option
  • SPOT: EEX spot products
  • TBOND: Treasury bond
  • CS: Common stock
  • NONE: No security type (Not valid for 35=c, e or V)
> 764 LegSecuritySubType N String

Replaces 7.X tag 310 (UnderlyingSecurityType)

SecuritySubType of the leg instrument.

See SecuritySubType (762) field for description
> 610 LegMaturityMonthYear N MonthYear

Replaces 7.X tag 313 (UnderlyingMaturityMonthYear)

Multi-leg instrument's individual security's MaturityMonthYear
> 611 LegMaturityDate N LocalMktDate

Replaces 7.X tag 314 (UnderlyingMaturityDay)

Multi-leg instrument's individual security's MaturityDate.
> 18314 LegMaturityDay N DayOfMonth

Replaces 7.X tag 314 (UnderlyingMaturityDay)

Multi-leg instrument's individual security's MaturityDay.
> 612 LegStrikePrice N Price

Replaces 7.X tag 316 (UnderlyingStrikePrice)

Multi-leg instrument's individual security's StrikePrice.
> 1358 LegPutOrCall C int

Replaces 7.X tag 315 (UnderlyingPutOrCall)

Whether the option represents a put or call

Possible values include:

  • 0: Put
  • 1: Call

Condition: Required when Tag 609 (LegSecurityType) is OPT

> 624 LegSide N char

Replaces 7.X tag 16624 (LegSide)

The side of this individual leg (multi-leg security).

Possible values include:

  • 1: Buy
  • 2: Sell
  • 3: Buy minus
  • 4: Sell plus
  • 5: Sell short
  • 6: Sell short exempt
  • 7: Undisclosed
  • 8: Cross
  • 9: Cross short
> 623 LegRatioQty N Qty

Replaces 7.X tag 319 (RatioQty)

Ratio of quantity for this individual leg relative to the entire multi-leg security

The value represents one of the following:

  • For a leg of a covered strategy (such as a volatility trade) on CME or NYSE_Liffe markets, the value represents the delta (expressed as an integer between 1 and 100).
  • In all other cases, the value represents the quantity of this leg in the strategy.
> 556 LegCurrency N Currency

Replaces 7.X tag 318 (UnderlyingPutOrCall)

Currency associated with a particular leg's price
> 561 Roundlot N Qty

Replaces 7.X defined custom tag 16461 (LotSize)

The trading lot size of a security.
> 566 LegPrice N Price

Replaces 7.X tag 10566 (LegPrice)

Price of the leg for a multi-leg instrument
> 687 LegQty N Qty

Quantity of this leg.
> 654 LegRefID N string

Unique indicator for a specific leg.

Note: Sent only for FIX 4.4 sessions when the tag is included the corresponding New Order Multileg (AB) request. FIX 4.4 Drop Copy sessions will not send this tag for orders placed from the TT Trade application.

> 637 LegLastPx N Price

Execution price assigned to a leg of a multileg instrument.
> 18224 LegContractYearMonth N char Contract term of the underlying instrument in the form, YYYYMMM
> 18212 LegDeliveryTerm C char

Replaces 7.X tag 18212 (UnderlyingContractTerm)

Term of delivery for the underlying instrument.

TT FIX uses this value to identify contracts that do not have a monthly delivery term.

Possible values include:

  • A: Same day
  • B: Balance of month
  • D: Day
  • E: Weekly
  • H: Hour
  • L: Balance of week
  • M: Month
  • N: Next day
  • P: Pack
  • Q: Quarterly
  • S: Seasonal
  • T: Weekend
  • V: Variable
  • W: Week
  • X: Custom
  • Y: Year

Condition: Required when both of the following are true:

  • The Security Definition indicates it is required.
  • The delivery term is not monthly.
> 18213 LegDeliveryDate C LOCALMKTDATE

New tag for TT

Date for contract delivery

Condition: Sent when available
> 1366 LegAllocID C String

Identifier assigned to a leg of a multi-leg trade for ASX clearing purposes (clearing deal number).

Condition: Sent when provided by the exchange.
> 16568 LegAvgPx C Price

The average (mean) price for the legs of a spread.

This value will be populated on Summary Spread Fill Execution Reports.

Component: <LegSecurityAltIDGrp>
N Group

Repeating group of security alt IDs for legs in a multileg instrument. For additional information about this group, consult the full documentation.

Tag # Field Name Req'd Data type Comments
604 NoLegSecurityAltID C int

Replaces 7.X tag 146 (NoRelatedSym)

Number of alternate leg security IDs contained in this repeating group

Condition: Sent when there are one or more alternate leg security IDs
> 605 LegSecurityAltID Y String

Replaces 7.X tag 10456 (UnderlyingSecurityAltID)

Alternate ID for an instrument or security, typically for display purposes.
> 606 LegSecurityAltIDSource Y String

New tag for TT

Class or source of the LegSecurityAltID (605) value.

Possible values include:

  • 4: ISIN number
  • 5: RIC code
  • 8: Exchange security ID
  • 94: Alt Symbol (For ICE, the value is the "Cleared Alias" for the contract.)
  • 95: Clearport
  • 97: Alias
  • 98: Name
  • 99: Other
  • 91: Exchange Ticker
  • A: Bloomberg Code
  • S: OpenFIGI ID
Component: <LegFillsGrp>
C Group

Repeating group of fills for this leg instrument.

Condition: Only used in Execution Report (8) messages when the FIX client is connected to a TT FIX 4.4 session.

Tag # Field Name Req'd Data type Comments
16120 LegNoFills C NumInGroup

Number of partial leg fills included in an Execution Report

Condition: Sent for each leg when a multileg order is filled through multiple price levels in a single match transaction, i.e. "sweeping the market". Can be sent when LegNoFills = 1 for some markets, such as Eurex/EEX.

Note: Only sent if the FIX client is connected to a TT FIX 4.4 session.
> 16121 LegFillExecID C String

Unique identifier of leg execution as assigned by sell-side (broker, exchange, ECN). The ID must not overlap tag 17 (ExecID).

Condition: Sent when tag 16120 > 0
> 16122 LegFillPx C Price

Price of this leg fill

Condition: Sent when tag 16120 > 0
> 16123 LegFillQty C Qty

Quantity of this leg fill

Condition: Sent when tag 16120 > 0
> 16124 LegFillTradingVenueRegulatoryTradeID C String

Trading Venue transaction identification code of this leg fill

Condition: Sent if available when tag 16120 > 0
> 16125 LegFillLastLiquidityIndicator N int

Whether this leg fill was a result of a liquidity provider providing or a liquidity taker taking the liquidity in this LegFillsGrp repeating group.

Possible values include:

  • 1: Added liquidity
  • 2: Removed liquidity
Component: <Parties Group>
N Information about the entities involved in the financial transaction associated with this FIX message.

For additional information about this component group, consult the full documentation.
Tag # Field Name Req'd Data type Comments
453 NoPartyIDs N int

New tag for TT

Number of parties in the PartiesGrp repeating group
> 448 PartyID C String

New tag for TT

Party identifier code

Reserved values when 452=3 (ClientID) and 448=P (Short code):

  • 0: Own account; no client
  • 1: PNAL (Pending allocation)
  • 2: AGGR (Aggregated)
  • GU: CME give-up code (to override the Give-up code configured in Setup)
  • SX: SGX give-up code (to override the Give-up code configured in Setup)

Reserved when 452=12 (Executing trader) and 448=P (Short code):

  • 3: NORE: Execution decision outside firm

Condition: Required when NoPartyIds (453) is greater than 0.
> 452 PartyRole C int

New tag for TT

Type or role of PartyID (tag 448)

Possible values include:

  • 1: Executing firm (formerly FIX 4.2 ExecBroker)
  • 2: Broker of credit
  • 3: Client id (formerly FIX 4.2 ClientID)
  • 4: Clearing firm (formerly FIX 4.2 ClearingFirm)
  • 5: Investor id
  • 6: Introducing firm
  • 7: Entering firm
  • 8: Locate
  • 9: Fund manager client id
  • 10: Settlement location
  • 11: Order origination trader
  • 12: Executing trader (associated with Executing Firm - actually executes)
  • 13: Order origination firm
  • 14: Giveup clearing firm
  • 15: Correspondant clearing firm
  • 16: Executing system
  • 17: Contra firm
  • 18: Contra clearing firm
  • 19: Sponsoring firm
  • 20: Underlying contra firm
  • 21: Clearing organization
  • 22: Exchange
  • 24: Customer account
  • 25: Correspondent clearing organization
  • 26: Correspondent broker
  • 27: Buyer seller
  • 28: Custodian
  • 29: Intermediary
  • 30: Agent
  • 31: Sub custodian
  • 32: Beneficiary
  • 33: Interested party
  • 34: Regulatory body
  • 35: Liquidity provider
  • 36: Entering trader
  • 37: Contra trader
  • 38: Position account
  • 39: Contra investor id
  • 40: Transfer to firm
  • 41: Contra position account
  • 42: Contra exchange
  • 43: Internal carry account
  • 44: Order entry operator id
  • 45: Secondary account number
  • 46: Foreign firm
  • 47: Third party allocation firm
  • 48: Claiming account
  • 49: Asset manager
  • 50: Pledgor account
  • 51: Pledgee account
  • 52: Large trader reportable account
  • 53: Trader mnemonic (NASDAQ_EU only)
  • 54: Sender location
  • 55: Session id
  • 56: Acceptable counterparty
  • 57: Unacceptable counterparty
  • 58: Entering unit
  • 59: Executing unit
  • 60: Introducing broker
  • 61: Quote originator
  • 62: Report originator
  • 63: Systematic internaliser
  • 64: Multilateral trading facility
  • 65: Regulated market
  • 66: Market maker
  • 67: Investment firm
  • 68: Host competent authority
  • 69: Home competent authority
  • 70: Competent authority of the most relevant market in terms of liquidity
  • 71: Competent authority of the transaction
  • 72: Reporting intermediary
  • 73: Execution venue
  • 74: Market data entry originator
  • 75: Location id
  • 76: Desk id
  • 77: Market data market
  • 78: Allocation entity
  • 79: Prime broker providing general trade services
  • 80: Step out firm
  • 81: Brokerclearingid
  • 82: Central registration depository
  • 83: Clearing account
  • 84: Acceptable settling counterparty
  • 85: Unacceptable settling counterparty
  • 122: Investment decision maker (IDM)
  • 200: Account code
  • 201: Takeup firm
  • 202: Clearing instruction
  • 203: Customer info
  • 204: Allocation entity ID
  • 205: Account type
  • 206: Giveup firm
  • 207: MIFID ID
  • 208: Composite MIFID ID (ICE only)
  • 209: CTI code
  • 210: LMA clearing account
  • 211: Authorized trader ID (ICE only)
  • 212: Frequent trader ID (CFE only)
  • 213: User (TFEX only)
  • 214: Member(TFEX only)
  • 215: Trading member(TFEX only)
  • 216: Clearing member(TFEX only)
  • 217: Acting user(TFEX only)
  • 218: Trader ID(TFEX only)
  • 219: Owner type(TFEX only)
  • 220: Routing Member ID (ICE only)
  • 221: Give-up qualifier (This party role allows FIX orders to override the CME Give-up code configured in TTUS on FIX order messages. Set tag 448 value to "SX" when mutually offsetting to SGX. Set 448 to "GU" for all other Give-ups on CME.)
  • 222: Algo strategy type (For TOCOM only to override the Algo Strategy Type setting configured for FIX messages in Setup.

Condition: Required when NoPartyIds (453) is greater than 0.
> 2376 PartyRoleQualifier N char

Qualifies the PartyRole (tag 452) supplied for this PartyID (tag 448).

Possible values include:

  • 22: Algorithm
  • 23: Firm or legal entity
  • 24: Natural person

Default values are set for this tag when PartyRole (tag 452) is one of the following:

  • When 452=3 (Client ID), the default is 2376=23 (Firm).
  • When 452=12 (Execution Decision Maker), the default is 2376=24 (Natural Person).
  • When 452=122 (Investment Decision Maker), the default is 2376=24 (Natural Person).

Condition: Required when NoPartyIds (453) is greater than 0.
> 447 PartyIdSource C char

Identifies class or source of the PartyID (448) value.

Possible values include:

  • 1: Korean investor ID
  • 2: Taiwanese qualified investor ID (QFII FID)
  • 3: Taiwanese trading account
  • 4: Malaysian central depository
  • 5: Chinese investor ID
  • 6: UK national insurance or pension number
  • 7: US social security number
  • 8: US employer or tax ID number
  • 9: Australian business number
  • A: Australian tax file number
  • B: BIC
  • C: Generally-accepted market participant identifier
  • D: Proprietary
  • E: ISO country code
  • F: Settlement entity location
  • G: MIC
  • H: CSD participant member code
  • I: Directed broker three-character acronym as defined in the ISITC ETC Best Practice Guidelines document
  • P: Short code

Condition: Required when NoPartyIds (453) is greater than 0.
> 1152 LegNumber N int

The leg sequence number for a strategy
> 552 NoSides N NumInGroup

Repeating group for sides of the trade
> 54 Side N char

Side of the order

Possible values include:

  • 1: Buy
  • 2: Sell
  • 3: Buy minus
  • 4: Sell plus
  • 5: Sell short
  • 6: Sell short exempt
  • 7: Undisclosed
  • 8: Cross
  • 9: Cross short
  • B: As Defined (FIX 4.4 only)
  • C: Opposite (FIX 4.4 only)
> 37 OrderId N String

Unique identifier for order as assigned by sell-side
> 1 Account N String

Order-routing account for this side of the trade
> 80 AllocQty N String

Quantity to be allocated to the specified account
> 1047 AllocPositionEffect N String

Whether the resulting position after a trade should be an opening position or closing position

Possible values include:

  • O: Open
  • C: Close
  • R: Rolled
  • F: FIFO
  • N: Close but notify on open
  • D: Default
> 18102 UserID C String

New tag for TT

The TT User ID configured in User Setup.

UserID only displays if enabled via the Send TT Internal Account ID and User ID on Execution Reports And Cancel Reject Messages checkbox in User Setup.

> 18218 TTCustomerName C String

New tag for TT

The Order Profile applied to the TT account.

Can be used by FIX clients to specify the User Setup Order Profile name to be applied to a new order / change order message.

If the successful lookup includes an Order Profile, the profile name is copied to Tag 18218, TT Customer Name.

> 10553 TTID C String

New tag for TT

The TTID configured in User Setup.
> 16849 SideTextA N String

New tag for TT

Populated when Order Tag Default values for the Text A field are defined in Setup.

Note: Only supported for HKEX Wholesale Orders.
> 16850 SideTextB N String

New tag for TT

Populated when Order Tag Default values for the Text B field are defined in Setup.

Note: Only supported for HKEX Wholesale Orders.
> 16851 SideTextC N String

New tag for TT

Populated when Order Tag Default values for the Text C field are defined in Setup.

Note: Only supported for HKEX Wholesale Orders.
18220 BrokerID C String

TT-defined short code for the broker.

Condition: Sent when available in Execution Report (8), Order Cancel Reject (9) and Trade Capture Report Ack (AR) messages.

18221 CompanyID C String

TT-defined name of the firm that sends messages to the exchange

Condition: Sent when available in Execution Report (8), Order Cancel Reject (9) and Trade Capture Report Ack (AR) messages.

Note: If the Company Administrator specified a FIX Company ID for a managed user in Setup, that value is returned in this tag.

Component: <Standard Trailer>
Y For additional information about this component group, consult the full documentation.
Tag # Field Name Req’d Data type Comments
10 Checksum Y String

Unencrypted three-character checksum

This tag must always be the last field in a message (i.e. it serves, with the trailing <SOH>, as the end-of-message delimiter).

Message Notes

The Trade Capture Report Ack (AR) message can be:

  • Used to acknowledge trade capture reports received from a counterparty
  • Used to reject a trade capture report received from a counterparty